Setting up TinyGS on Heltech Wireless Tracker V1.1

TinyGS is a great project with a very simple installation. The documentation however is several years out of date, so prepare the pull your hair out. After installing it twice with a six month interlude, I forgot what I needed to do, so am documenting it here for future me.

  1. When freshly minted, it will present a WiFi network. Connect to the network and browse to 192.168.4.1.
  2. Go to “Configure Parameters” and set the details.
    • GroundStation name can be anything.
    • The WiFi SSID and Password are for the local network you want it to connect to.
    • MQTT Username and Password can either be found in your password manager from last time, or via the Telegram messaging app Bot with the “/mgtt” command.
    • Board type: 433MHz HELTECH LOTA32 V3.
  3. Reboot the node, and because the display doesn’t work, you’ll need to look for a new DHCP lease on the network. Open that IP in a browser.
    • If it can’t connect to your local WiFi network, it will again create it’s own WiFi network for you to connect to. The password will be the Admin password set in the configuration.
  4. The final step is to login to the online portal and “Operate” the node.
    • From the Telegram messaging app Bot, issue the “/weblogin” command. This will provide a link which will log you into the station.
    • At the top of the window, click the “Operate” button. In the Automatic Tuning dropdown: “Enable 433”.

That’s it. I hope the third time isn’t as frustrating.

Lance

October, 2024

Leave a Reply

Your email address will not be published. Required fields are marked *